Headset strengthener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strenghten/reinforce your headset with this piece that you can slide on your headset to protect it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
My PLT Backbeat Go 810, which I have used for countless of hours started cracking up and getting loose on the top. Probably because I didnt take well care of it.
I decided to make a 3d model which i could put on top to enforce/strengthen it, and it worked like a charm. No need for glue or anything. I just slided it in place and saved myself from buying a new headphone.
This model probably works for other headphones, and with modifications it could be suited for even more.
Outer width measures 37 mm and the inner is 33 mm.