Kids Roller for Play Dough or Slime
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a roller for Play Dough, Play Sand, Slime, etc. It needs your own 608 bearings and 8mm rod.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 839
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a roller for Play Dough, Play Sand, Slime, etc. It needs your own 608 bearings and 8mm rod. Then everything needs to be assembled such that it won't come apart during use.
Thank you to the original creator for making their design available. I ended up using the rough measurements and re-implementing it from scratch to capture the bearings and have rounded ends on the roller.
Only use supports for the main structure. If you leave them on the handles as well they'll likely require some drilling to clear the plastic.
08/08/19: updated the roller handle for better slicer compatibility.
Find more of my work at https://pcburn.com
Print instructions
Unassociated tags: play dough
Category: Toys & Games Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 35%
Filament: any PETG -
Notes:
You'll probably want supports from the bed.