Encoder and slip ring mount for FFBeast Wheel v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated Fusion 360 file with two new ways for the magnet holder to mount to make assembly easier.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 326
- Wydruki
- 1
- Wyświetlenia
- 2719
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
See v1 here: https://www.printables.com/model/1282058-hoverboard-motor-encoder-and-slip-ring-mount-for-f
After feedback I've updated the Fusion 360 model by adding two other versions of the magnet holder, one that screws onto a 3d printed spacer and another that has the screws positioned outside of the ball bearing housing. They should make it so you don't have to remove the hoverboard motor ball bearing.
Edit: I've added a third stl version of the magnet holder to suit Viih's original centering piece. It will only give you 0.5mm clearance on each side of the center hole for the encoder holder and slip ring and you'll have to use screws to fix it with head diameter of less than 6mm (which shouldn't be too hard, 4g posidrive screws I have have 5.5 dia heads).
I've also added parameters and updated the design a bit so it's easier to adjust things like the fit of the shaft, how far it sticks out the wheel and the magnet holder mounting hole sizes and positions.
More information on the FFBeast project can be found here:
https://ffbeast.github.io/docs/en/wheel.html