Drilling jig with centre distance for handle (door and drawer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This drilling template allows you to easily place and drill a handle on all types of fronts kitchen door or drawer…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 179
- Wydruki
- 1
- Wyświetlenia
- 1392
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This drilling template allows you to easily place and drill a handle on all types of fronts kitchen door or drawer door with the 12 most common centre distances.
The model is probably larger than your print area. Use your favorite slicer to split the model exactly in the middle. There are holes in the model for screws and nuts to rejoin the two parts.
You will need:
2x M4 45mm, Allen screw
2x M4 nut
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
300
Infill:
5
Filament: PM PLA Black & White
Notes:
It's probably a good idea to use a larger infill if you want to hold the jig with joinery clamps. This will give it more strength. I used 3 perimeters of the wall on my printout.
Category: Hand Tools