Valentines Heart for a Loveletter or red rose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 12 cm big heart on a rotating stand with a small heart in die body and space for a red rose on the backside.
- Ocena
- 4,667 / 5
- Polubienia
- 152
- Pobrania
- 867
- Wydruki
- 4
- Wyświetlenia
- 3769
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the new version of a 12 cm big 3D heart with a second small heart in the big heart. You can place the heart on the stand ore use it alone. A nice way to present a message, gift or picture now in combination with a flower.
Put your loveletter in the small heart and add a red rose.
The new version has space (a opening) for a red rose or a dry flower on the backside of the heart and I made some improvements of the old 3D heart (e.g. close the second opening for a stand).
I know, 10 hours are a long time but when you wake up in the morning and you see the big heard on your headbed you will find a smile on you face.
Please use support unter the heart and place the heart on the small bolt unter the heart when you slice it (see the picture). I have used 15 % of infill because with less it was really hard to print. Maybe my problems have the reason in the quality of the used material.
I also used PETG with the smooth heatbed, with PLA I had some problems with this print.
I don't have used support for the little heart. In the right position you have the chance for a good print quality without any support for this opening. For the design I have used Fusion 360 and the Prusa slicer.