Family Guy - Peter Griffin magnet - keychain

Must have magnet or keychain.

2 or 4 colors, easy print

The magnet version in 1,5mm thick, the keychain 2mm thick.

NOTE for the magnet version simply glue any magnet on the back…

For the dual color version you must slice, add a pause and start the print in white. When the printer stops, change the filament color in black

f you want to print the multicolor with a mono extruder you can follow this guide:

-----------------------------------

HOW PRINT IN MULTICOLOR WITHOUT MMU:

1. Printer Settings → GENERAL → EXTRUDER
2. add 1 extruder for each color, in this case 4 extruders (black, white, brown, pink)
3. assign a color for each extruder
4. go to Pinter Settings → Custom Gcode → Gcode tool change and add this lines:

; START_CUSTOM_TOOL_CHANGE LAYER
[layer_z] / [layer_num]
{if layer_num >= 0} M600{endif}
; END_CUSTOM_TOOL_CHANGE

5. go to PRINT SETTINGS → MULTIPLE EXTRUDER → CLEANING TOWER

6. Enable the purge tower

7. import the first item, the white base

8. on the white base ites, right click, then choose ADD MODIFIER and select LOAD. now pick one color and repeat the same procedure for all the colors.

9. Assign the right color for each part. Look at the right part of the screen, you will see the part name and a little box with the part color. change it to the color you need to print.

now slice and see it everything is ok, then print. The printer will stop for color change, so be prepared to change it a lot of times….