Voron Trident MGN9C For Dragon Burner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mgn9c dragonburner mount for trident and v2.4, probe compatible remix
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a modified version of the original Chirpy2605 MGN9H Dragon Burner mount, adapted to support MGN9C linear rails. The mount is fully compatible with Voron V1 and V2 setups and retains all essential alignments and dimensions of the original MGN9H model.
🔄 Key Modifications:
Reworked to support MGN9C rail carriage (short block) instead of MGN9H (long block).
Preserves all mounting and probe compatibility from the original.
Compatible with the official Dragon Burner probe mount (from the Voron GitHub repo).
Designed with additional support generation in mind – support is required for clean results.
🖨 Print Settings (Recommended):
Material: ABS or ASA (Voron standard)
Supports: Yes (mandatory for proper overhangs and geometry)
Layer Height: 0.2 mm
Infill: 40% or higher for rigidity
Wall Count: 3+
Cooling: Off or minimal
📦 Includes:
MGN9C-compatible X carriage mount
Compatible with Dragon Burner assembly
Aligned holes for Klicky/Euclid probe adapters (if required)
📌 Notes:
All clearances and tolerances match the original MGN9H version.
Use high-quality MGN9C rails to maintain rigidity, especially for high-speed printing setups.