Gyroid Plant Pot - Concrete Molds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY concrete Gyroid molds from Animal Crossing – 3-part design, printed with TPU 85A
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
These are concrete molds for a Gyroid from Animal Crossing.
They're based on the following 3D model: https://www.thingiverse.com/thing:3442346
The final figure consists of three parts: the left arm, the right arm, and the body. The arms are designed to be glued onto the body at the provided holes after casting.
I printed all molds with flexible TPU 85A, which makes demolding easier.
The pouring hoppers can be printed in standard PLA or any other rigid filament.
This whole project was inspired by the following tutorial: