1 / 6
Propeller cone with a diameter of 50 mm, vrtulový kužel 50 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Propeller cone with a diameter of 50 mm. Hole for an 8 mm shaft.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Propeller cone with a diameter of 50 mm. Hole for an 8 mm shaft.
Recommended to print with 100% infill using ABS or PETG.
Enforced supports are required on the build plate.
Designed for use with self-tapping 2.1 × 15 mm screws.