Signal Strength Meter | Addressable LED Based | Arduino
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created an WS-2812 addressable LED based signal strength meter for an Artificial Ham Radio I'm building
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Update: model file “Signal Strength Meter3.stl” lifts 1mm more of the lens out from the panel for better display. It's used in this device: https://www.printables.com/model/1329065-fluxtune-artificial-ham-radio-arduino-ad9833-based
I needed an Artificial Signal Strength Meter for an Artificial Ham Radio I'm building. This unit is 50mm x 15mm and includes room to insert a strip of 7 WS-2812 LEDs on from a tight strip.
Printed in clear PLA on a QIDI Plus 4 at 0.08mm High Quality 100% infill “concentric” pattern with ironing and with print bed supports.
The LED strip portion used in part of a 144 LED strip commonly available on Amazon.com, for example, https://www.amazon.com/dp/B0BDRCQWWQ
Sources: https://www.tinkercad.com/things/hOFztgc6uYg-signal-strength-meter3