1 / 1
Yakima Round Bar Gunnel (gunwale) grabber
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yakima round bars don't grip canoe's very snugly. Fix that with these simple objects
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use TPU, wrap it on the round bar with the long leg pointing upwind (front of the vehicle). Slide to the width your canoe needs, strap it down with a good strap. NRS strap not required but they sure are nice!
My print settings with TPU were:
- 20% gyroid infill
- 3 perimeters
- 3 top layers
- 3 bottom layers
- No support required on my printer
- dynamic speeds to keep the mild overhangs reasonable
- printed so the yakima round bar would go up/down through the print bed