Spoolbox X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spoolbox with 3 ways to load the filament spool.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi! This is my Spoolbox version.
Improvements:
It is easier to pass the filament through the Connector Tube Fitting and the PTFE tube inserted through it. 
M3 x 16 mm can be used to assemble the spoolbox, not necessarily the M3 x 50 mm anymore.
Nuts can be inserted through a slot by the side (a 0.2 mm layer is added so you can punch it to screw the bolt).
There is more space at the bottom to add a plastic box for the dessicant.
Three ways to load the filament spool.
Check the file here: https://a360.co/3SQTDA0
I used Colorfabb VarioShore TPU for the seals.
BOM:
10 x Hexagon Socket Head Cap Screw M3 x 16 mm
2 x Hexagon Socket Head Cap Screw M3 x 40 mm
1 x Hexagon Socket Head Cap Screw M3 x 30 mm
13 x Hexagon Regular Nut M3
2 x M10 Pneumatic Fitting Push
4 x Ball Bearing Shielded, Trade No. 688-2Z
2 x 8 mm steel rod x 84 mm
Let me know if you have any issues printing the spoolbox, I'll try to fix it asap.