Gas Pump for Transformers SS86 Optimus Prime's Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As a homage to the original accessory from G1 Optimus Prime, here's the gas pump for his little pal, Roller!
- Ocena
- 0 / 5
- Polubienia
- 2
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
As a homage to the original accessory from G1 Optimus Prime, here's the gas pump for his little pal, Roller!
The two pieces of this kit will require a short length of flexible 1.75mm filament to connect them up. We've use a length of TPU here. If you don't have something like that handy, PLA should work also but it would decidedly less flexible.
The gas pump sports a 5mm peg to allow it to be attached to the port on Roller's rear. The nozzle component can just be placed inside Roller to keep things neat.
And with this kit, Roller can zip around helpfully to keep his Autobot pals all topped up on (Energon?) fuel.
And since the connecting peg is 5mm sized, the pump can also be held by most bots in their hands too.
===
Hope this will be a fun addon to help further complete Roller's accessories for SS86 Optimus Prime. Happy 3d printing! =)