Window Shelter / Outdoor Cover for Mijia Temperature Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shelter enables to mount the popular Mijia Temperature sensor outside of a window to measure outdoor temperatures.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This shelter enables to mount the popular Xiaomi Mijia Temperature sensor outside of a window to measure outdoor temperatures.
It includes holes to have air flow to the sensor, as well as a drainage hole on the bottom in case rainwater gets inside. The sloped roof has a hole, from which it can be hanged outside a window. There is also some room for two-sided tape behind the sensor - however in testing the model has come out snug enough to stay in place with friction only.
Should print on its back without supports. Use any material of your choice, but be mindful that especially PLA will degrade in the sunshine over time. ASA or PETG are best for long-term durability.