1 / 1
Steel tubing mitre cut templates (metric) — zdjęcie 1

Steel tubing mitre cut templates (metric)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Templates for marking out square and 45 degree mitre cuts on metric tubing. 15x15, 20x20, and 20x40 mm versions included

Ocena
0 / 5
Polubienia
0
Pobrania
29
Wydruki
0
Wyświetlenia
250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

These are templates designed to slide over tubing (square and rectangular profiles) and use to mark out square and 45 degree mitre cuts, mostly for making simple welded frames and such.

 They are designed for metric steel tubing, specifically 15x15mm, 20x20mm, and 20x40mm profiles, mostly because that's what I tend to keep around for projects. Will probably add other dimensions as I find myself needing templates for them.

There's about 0.3mm clearance around the tube, which is a little on the loose end - press one corner of the template onto the profile and hold it there while marking out the perimeter. If you've previously cut the tubing with a grinder, you probably need to deburr the edges to make the template slide on.

Should print acceptably with just about anything, the included photos are random PLA, 0.2mm layers, 0.4mm nozzle on a Prusa mini. If you're using them on freshly grinder-cut or welded steel, it may end up being a little too hot for PLA.

Tagi