A Soldier's Prayer - Companion Plaque
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Soldier's Prayer - Companion Plaque
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
This is a simple companion plaque for my “A Soldier's Prayer - Hueforge Portrait”
Created within PrusaSlicer. Print with a .2 layer initial layer and layer height. I recommend printing slowly using 1 perimeter at 100% infill for best results and weight. There is a color change at layer 6 (1.2mm) - I recommend using a dark filament for the bottom layers, and switch to a light colored filament for the top layers. I've used Polymaker Polyterra Matte Charcoal Black for the bottom layers, and Polymaker PLA White for the remaining layers.
The model is x220mm x y146.67mm - you will need this size to create the frame listed below.
Sized so you can print the frame on a standard sized printer.
I recommend this frame: https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings
It's a great design and you can set it for any size hueforge print you want. You can use the free version of Fusion360 to create new sizes easily, don't be afraid to try it out even if you've never used Fusion360 before.
Enjoy!