1 / 8
Delica L400 S1 (Gen 1) 1995, Read AC panel level cap — zdjęcie 1
1 / 8

Delica L400 S1 (Gen 1) 1995, Read AC panel level cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cap for the Mitsubishi Delica L400 Rear AC unit control panel Hot/Cold lever and Rear AC vent control lever.

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

This is a cap for the Mitsubishi Delica L400 Spacegear (Gen 1, 1995) Rear AC unit control panel Hot/Cold lever and Rear AC vent control lever. This cap has been modeled in Fusuon 360 and printed using Balbulab P1S.

I have printed it using both generic ABS and PLA. Both needs support when printed upright (recommended, as shown in one of the pictures). I've used tree type support, but you can experiment with other tpes of support. The layers are 0.12mm. It doesn't look as bad as in the picture. While the PLA version is a bit glossy, the ABS version gives it a mate finish.

Tagi