Gl iNet Opal Router mount for SVBony SV Scope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Opal Router mount for SVBony SV series.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to mount my opal router directly to my SV503ED70 it should fit other SV and possibly other scopes as it utilizes the M4 20mm spaced holes normally used to mount a finder shoe. The base is designed to fit snugly around the 75mm diameter radius of the scope at the mounting position.
To minimize supports I'd print it with the long axis vertical.
I recommend the use of M4x10 countersunk bolts for fitting.
The Opal router is a snug fit but does not require the feet to be removed. Indeed, its snug enough to stay in place without additional zip ties etc. When the aerials are rotated out they will further secure the router in place. There is a little slack in the front to back measurement for wriggle room :)