Milwaukee Knife Handle Sides (Scales)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scales for the Fastback. No clip.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Milwaukee fastback custom knife scales.
This is my version of custom knife, sides, or scales for the Milwaukee fastback utility knife. It is designed with no clip and there is no gluing required. The model is comprised of 2 parts side A and side B. I don't feel the infill percentage is important as the inside of the knife is supported by a metal plate but use whatever infill you want, same with the layer height, I print mine at .1 layer height but i'm sure you can do what ever you want and it should be fine.
Sopports: I recommend blocking and painting the 2 areas seen in the pictures of side B that together with automatic supports you should be fine.
Tools: For this project, you will need a torque T6 2 T10's, pliers, Phillips screwdriver, small hammer and a torch.
Polymaker now has tool color filament so you can convert this handy little knife into a De Walt or Makita knife.