1 / 2
Heavy duty lamp support for Skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy duty Skadis lamp support for Tertial and others lamp with 12 mm attachments
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Heavy-duty Skådis lamp mount for Tertial and other lamps with 12 mm attachments.
You may need to remove the panel from the wall to install the support at a higher point.
Print the mount laying flat for increased strength. Use 20% infill and 4 walls. No support supports are needed.
Note: this model uses four M5×6×7 brass threaded inserts and four M5×15 hex socket screws.