1 / 1
65mm and 120mm bowden tube spacers for CoPrint 4 colour extruder setup
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple braces to hold the bowden tubes where needed
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two different sized braces to hold the bowden tubes at the correct locations and prevent them getting tangled
I have a CoPrint 4 colour setup with the filament on rollers on each side and needed a basic way to manage the tubes to prevent filament tangling.