Garden Pro Telescoping Secateurs Spring Loaded Detent Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The black plastic part of the spring loaded detent buttons on a pair of telescoping secateurs by "Garden Pro".
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v3.0
A quickly reverse engineered model of the black plastic button for the spring-loaded detents on a set of “Garden Pro” telescoping secateurs. One of the two black buttons broke off and needed to be replaced.
It should be possible to print this on a potato but I did it on my heavily modified/tuned acrylic Geeetech i3 Pro B with a textured PEI build plate, Trianglelab Titan and V6.
The test print in the photos is in black PLA but I recommend PETG or ASA (this is outdoor equipment, so you want toughness and UV resistance). The final part in use is printed from black PETG.
Print without supports (all angles are 45°). I printed with 3 walls, 3 top and bottom layers and at that point there's two layers of infill so it doesn't matter but 15% gyroid is what I had set.
The screw doesn't quite sit as deep as it did on the original, this is because on the original the hole for the screw is oversized so it sits lower. You can make this modification in FreeCAD if you wish, but it makes no functional difference to the part as there's plenty of thread engagement and if anything the additional material will make it tougher.