Replacement drip tray for the GRP4PBW George Foreman Lean Mean Fat Reducing Grilling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement of drip tray (Part # 22619) for George Foreman Lean Mean Fat Reducing Grilling model GRP4PBW
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So funny enough my dad somehow also misplaced the drip/grease tray for their Foreman Grill. Rendering the grill unusable since without the tray grease drips onto the counter.
Needed my tray to be 12 ¼'' long and could just barely make that on a 225mm x 225mm build plate if I printed at an angle and made the endings triangular to reach the all the way to the corners.
I did mine in PLA and build plate adhesion was a nightmare. Cleaning the plate to like new and preheating till the entire plate was at temp and not just the center helped keep warping down. Also changed the top and bottom line angles to 75, 135, 165 so it didn't print long lines from corner to corner and instead printed shorter lines. I'm not sure how but on one of my first print attempts it printed the wall past the edge of the plate??? So watch the first layer in case you have to adjust.