Melissa & Doug - Scoop & Serve Ice Cream Counter spare cups cones and scoops
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare cups, cone,s and scoops for Melissa & Doug's wooden ice cream counter kids role play toy
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Something I made a few years ago when my kids received this set. Keep the game going longer with these extras.
This design has gone through a few iterations to achieve the correct interference fits with each item and the original pieces.
The joiner is best printed on its side (denoted by the flat section of the centre cylinder) and with supports (" snug" and “detachable” are recommended).
Note the correct orientation to assemble to ensure the interference fit into the scoop is more permanent and difficult to remove compared to the intentionally detachable side for insertion into the cone, cup and other stacked scoops.
All other parts will print fine with no supports, biggest flat side down. Prints fine with 0.6mm nozzle, use adaptive layer height to achieve the best results for the scoops. 2-3 perimeters give the pieces a nice, heavy feel similar to the originals.
PETG is recommended for this item only, although you may have success with PLA, but it will be a bit stiffer and may be more difficult for the kids to pull apart.
All other components can be printed in your favourite coloured filaments.
I recommend experimenting with colour change, silks, glow in the dark or heat colour change for extra fun.
(Please check your materials for harmful ingredients before printing, some kids tend to take role-play very seriously and really get stuck into the ice-cream).
Please be aware of the choking hazard if the joiner does not fit tightly. I've tried to make it as difficult as possible for little hands to remove, but some kids have superhuman strength and I'd recommend glueing (with non-toxic glue, obviously) if you have that type of child.
I've added a few different variants of the cups depending on whether you want them to be captive in the circular cut-out on the top of the set (pain to print supports) or whether you want to print them faster and with less post-processing.
I've even added a blank STEP file if you want to add your own text to customise.
I may add some additional accessories if people appreciate this set. I was thinking of waffle cones and “Flake” chocolate addition, which is popular from my part of the world.
If your kids enjoy these as much as mine have, consider tipping. Many hours and experimentation went into making these.
