Rugged Box for Canon Selphy CP1500 and RP-108 pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I’ve remixed the parametric rugged box to fit the Canon Selphy CP1500 and one full RP-108 cartridge plus paper pack.
- Ocena
- 3 / 5
- Polubienia
- 19
- Pobrania
- 140
- Wydruki
- 2
- Wyświetlenia
- 692
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2025/06/26
v2 uploaded - sorry for the trouble, I was uploading the correct 3MF and F3D but the former export of my STL / STEP files
I was looking for a rugged box for the Canon Selphy CP1500 and now made my own to fit the printer and also a spare cartridge+paper pack including the power cable. Presently there is no space for a battery pack, but this may be added in future versions.
You will need two latches. The .step file contains one, the .stl contains two latches.
I‘ve printed in PLA, but any other filament works, too. The seal shall be printed in TPU.
I used following settings:
Layer height: 0,2mm
Infill: Gyroid, 10%
Feel free to edit the text on the lid. Fusion file is uploaded, too.
This is my first upload, if you enjoy my models feel free to buy me a tea:
https://paypal.me/konradskiste
Enjoy!