9V Battery Holder - Clip - Pocket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple "pocket style" holder for a 9V battery, designed to be screwed onto an appropriate surface.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Assembly and Use
No assembly is required, but two flat head #4 (M3) of a length appropriate for your application are required (actually, one screw is probably adequate for most situations). For my application I used two #4 X ½" wood screws. There are access holes in the front of the holder so that a screw and screwdriver can be inserted.
I needed a 9V battery holder for a Pachinko machine I am restoring, and I prefer a simple “pocket style” holder so I can simply drop the battery into the holder ( see photos).
Since 9V battery can come in slightly different sizes within the allowed size tolerances (see included dimension drawing), I made the holder to fit the largest battery size.
Print Instructions
Print in PLA using the 3mf files provided, otherwise :
- 0.2mm layer height
- 3 perimeters
- 0% infill
CAD
The OnShape 3D CAD files for this are here :