Pachinko Ball Storage Cup/Tray and Guide Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cup (tray) to receive played Pachinko balls, and "guide rails" to keep it in the correct psotion.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 132
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Note : This was sized to fit my particular Pachinko machine ( a Kyoraku model, ca. 1970s?) so you will need to determine whether it will work for your machine.
For mounting the Rails you will need #6 x 1" (M3.5 X 12mm) flat head screws.
The dimensions of the tray are as follows (assuming a rectangular solid) :
- External : 181mm W X 90mm H X 93mm D
- Internal : 170mm W X 90mm H X 81mm D
The design can likely be scaled to fit other requirements, but note that the Rails are angled on the inside to match the side angles of the Tray so it may be necessary scale the rails as well.
Assembly and Use
The Tray requires no assembly, but you may want to add a piece of foam sheet or felt to the inside bottom to cushion the impact of the balls; a top view drawing of the Tray is included, which can be printed out and used as a template for cutting a Tray liner.
Rails : Note that there is a Left Rail and a Right Rail (see photos). The Rails are designed to be screwed onto a wood base with wood screws, and the screw mounting holes are angled to make it easier to drill pilot holes in the limited space inside the back of the Pachinko machine. The positions of the Rails are determined by the required location of the Tray under the ball channels at the bottom of the machine.
Print Instructions
Print in PLA using the 3mf files provided, otherwise :
- 0.2mm layer height
- 3 perimeters
- 10% rectilinear infill
CAD
The OnShape 3D CAD files for this are here :