AnkerMake M5C Filament Spool Relocator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lowers the AnkerMake M5Cspool about 8" to fit inside enclosures
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This cap lowers the spool about 8" so it can fit inside enclosures. I purchased the Yoopai enclosure and this fits inside with plenty of room. You may have to revert back to the taller mount if you print tall models. This comes in pieces and requires super glue for assembly. It was tested 1 hour after gluing with a full 1kg spool, and did not separate. I did not have to shorten the feeder tube, however it is on the long side; multiple prints have been made since, and it is feeding filament just fine. The intact spool mount .stl file is included if you wish to separate it and join it differently.