UniRC 7 Accessory Mount / Display holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UniRC 7 Mounting bracket for external display or other equipment.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A clamp with bolt on Gopro style mounting for equipment and a secondary monitor to be installed to the UniRC 7 remote controller. It locks onto the handle bar.
Hardware:
- 2x Bolts/nuts for gopro mounts
- M3 screw kit (Different lengths needed)
- M3 nuts
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Filament: PLA
I have a Peakdo 7 inch monitor installed with the Edge T3 system for lower latency video and backup video feed.
Tip if you want to use the SIYI UniRC7 on smaller lightweight drones:
By using the new Edge Smart Drive T3 HD system, the UniRc7 airunit can be connected via the SBUS and UART ports on the Edge T3 VRX. This setup allows data transmission from the UniRc7 transmitter to the airunit, then to the Edge T3 VRX, and finally to the T3 airunit.
With this configuration, I now get both telemetry and remote control functionality through the UniRc7. Video is output separately to the peakdo 7inch monitor.
This reduces the weight and size of the equipment on the drone/aircraft aswell as video latency.