BlueSCSI v2 - ISA Style Mounting Bracket for Vintage PCs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for BlueSCSI v2 (2023.10a) designed to fit in an ISA (or PCI) slot found on most vintage PCs.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a BlueSCSI v2 SCSI emulator mounting bracket for use with Vintage PCs. It mounts like an ISA expansion card, providing external access to the SD card slot. It will also work in PCI slots, though be mindful that PCI cards are oriented towards the other end of the bracket so you could run into conflicts with neighboring cards.
It is specifically designed for the 2023.10a version of the internal 50-pin board (at least one of the screw holes may line up on older versions of the v2, but I don't have any to verify).
M2.5x10 screws and nuts were used to attach the BlueSCSI to the bracket (though there's enough clearance that M3 could work)
If you get a warning about “floating cantilevers” or similar, ignore it. This is because of the model's built-in breakaway support. There's a 0.2mm gap between the support and the model itself.