Moondrop CHU2 IEM Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick case I designed for my new Moondrop CHU2's.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A quick case I designed for my new CHU2's, it has a latched lid, and even has spare room for spare ear tips. It's very simple, only requires some raw 1.75mm filament to use in the hinges. I was heavily inspired by RagingPandabear's case, so I decided to upload as a remix. It's not very great to be honest, I'm not very good with designing moving parts, but hopefully somebody can find a use for it.
I printed it on my Ender 3 @0.2mm layers, and I would recommend a 0.4mm nozzle or smaller, as the wall widths are only 0.4mm in a couple places, like the ear tip compartments. Assembly is pretty straight forward, just slide filament through the holes in the lid and latches. If desired, you could also melt the ends, like I did.