Anti-Kink Adapter for 6mm Medical Oxygen Concentrator Hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have an elderly friend who has to use an oxygen concentrator. Lately, he has been having an issue where the oxygen…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 62
- Wydruki
- 3
- Wyświetlenia
- 242
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I have an elderly friend who has to use an oxygen concentrator. Lately, he has been having an issue where the oxygen hose is bending and kinking at the end of the hose connector which was severely restricting his ability to breath. I found a model for an anti-kink adapter made by WinAir on Printables.com to help prevent this, but I found that the original model was pinching the hose at the skinnier part of the adapter. In order to prevent restrictions as much as possible, I scaled the design a bit larger to better accommodate 6mm oxygen hose and not compress the hose. You must squeeze the hose into the slot to get the adapter on to your oxygen hose. Once it is on, it should not be falling off as the slot is small enough that the hose should not be pulling out.
The original design by WinAir can be found here: https://www.printables.com/model/1315131-oxygen-loop-kink-protection
Print Settings
Printer Brand:
Bambu Lab
Printer:
Bambu X1C
Doesn't Matter
Supports:
No
100
Notes:
Because the part does not use a lot of plastic, I printed it with 100% infill in order to make sure it was durable. This may not be necessary.
Category: Other