Makita LS1219L DC/DC Cover - extended length
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enlarged cover for the larger DC/DC Converter in u/pemphillips "Retrofitting LED worklight/shadow line"
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
After getting the enlarged DC/DC Converter shared in pemphillip's Addendum V2, I saw that the larger footprint of that board did not fit in the existing cover. To make it fit and not have to cram everything into the opening haphazardly, I increased the width and depth of the box to ensure a good fit.
The width of the box (direction towards the saw blade) was increased by 8mm to fit the board, and the depth of the box (direction away from the trigger/handle) was increased by 2mm for extra space. Additionally, since the width extension would have collided with the plastic wire cover, this has a cutout to allow for the wire cover to fit with this extended width (see the second picture).