1 / 2
Moondrop Littlewhite Cable Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual-ended cable clip to hold Moondrop Littlewhite adjustable IEM cable
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Made due to the frustration caused by how badly thought out Moondrop Littlewhite adjustable IEM cable is. I live in a warm and humid country, so the rubber-esque cable clip barely holds the cable position; making the setup unreliable and annoying. It's even worse when an IEM is attached.
This clip helps by bypassing the rubber cable clip and holding both sides of the cable in position, though at a cost of making cable lenght adjustment a bit more of an activity.
Printed well on Prusa Mini with following configuration:
- 0.4 mm nozzle,
- (at least) 0.2 mm layers,
- (at least) 2 perimeters, and
- 20% gyroid infill (preferrably set up so that it will be a solid chunk of print after slicing),
- [RECOMMENDED] Some amount of outer Brim (I used 3mm),
- [RECOMMENDED] Aligned Seam position, and
- [IMPORTANT] Classic Perimeter/Wall generator.