Articulated Tarantula
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated tarantula with smooth joints and a wicked cool design. Perfect for your next 3D print!
- Ocena
- 5 / 5
- Polubienia
- 493
- Pobrania
- 3157
- Wydruki
- 19
- Wyświetlenia
- 8774
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Join here to get access: https://www.patreon.com/kogi3d
Hey everyone!
A brand new STL file is now available for you – an articulated tarantula with smooth joints and a wicked cool design. Perfect for your next 3D print!
License Notice:
This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any way, please visit my Patreon for licensing options and to support future designs.
This model is:
✅ Fully articulated
✅ Print-in-place ready
✅ Fun to pose and freak out your friends 😄
Material: PLA (recommended)
Layer Height: 0.2 - 0.15 mm
Infill: 15% or higher
Supports: Not required. If you experience any adhesion issue consider using a 3–5 mm brim.
Print Orientation: Default orientation – model is laid flat on its belly for optimal results.
📏 Print Size & Warning
This model was tested and successfully printed at the following dimensions:
X: 17.6 cm | Y: 15.5 cm | Z: 4 cm
⚠ Important:
Reducing the size of the model may result in weaker leg joints, which could affect articulation or cause parts to break more easily during printing or handling.
For best results, I recommend printing at the tested size or larger.