Ender 5 Pro PhaetusRapido2+ Orbiter 2.5 carriage conversion for native motion system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple conversion for Ender 5 standard motion system and carriage plate. Orbiter 2.5 and Phaetus Rapido 2+
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A really simple conversion for ender5 pro with original motion system.
Allows to equip it with Phaetus Rapido 2, Orbiter 2.5 and BTT Accelerometer. It is prepared for two 5015 cooling fans and one 4020 hotend fan.
IMPORTANT note:
There is no need for heat inserts. Everything is screwed directly into the plastic, made this model before I obtained heat insert press. I experienced no shaking or loose connections, step files are supplied so adjust the hole sizes as you need.
Orca slicer settings (main module and fan holders):
Layer height: 0.15;
Perimeters: 6;
Infill: 30% gyroid;
Supports: only under the long bridge;
Precise wall: on;
Zigzag perimeters: on;
Perimeters order: Inner/Outer/Inner;
Filament: Bambu PETG-CF.
Orca slicer settings (fan ducts):
--Same settings--
Perimeters: 3;
Supports: Manual for outer rim.
Additional: Ironing on every surface if you're pedantic.
You'll need to cut a piece of PTFE tube to connect extruder and the hotend for optimal filament path.