1 / 2
Dual Mount For 880LM Garage Door Openers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual Mount For 880LM Garage Door Openers
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Dual Mount For 880LM Garage Door Openers redesigned in a slightly difference size with mounting holes for both the door openers and screwing to the wall.
- I used GRK Cabinet screws to attached to wall
- Printed in PLA Silver
- 4 - M3 x 5.7mm threaded inserts https://www.mcmaster.com/94459A140/
- 4 - M3 screws https://www.mcmaster.com/92095A177/
Install Instructions
- Attached the bracket to the wall with your preferred screws/anchors
- Thread both bottom M3 screws leaving just proud
- Slide bottom keyhole down onto bottom screw
- Thread top screw in under flip up button