Dog Collar Can Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give a second life to those Seresto dog collar cans and convert them to a modular organizer
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I had a lot of Seresto cans lying around from antiparasitic dog collars, so I decided to do something to repurpose them, because they are great for storing little things.
This project features a different dividers Seresto cans, but they will fit any that is 120 mm in diameter (119.8 mm, actually for this type of can).
Available angles:
- 120º
- 180º
- 60º
- 90º
The dividers are a slightly smaller angle to account for tolerances, and once the full 360º is covered, they should not move or fall. If needed, I've included a pin that goes in the middle to secure the whole assembly (and to make it semi-permanent). They are really easy to print and engineered to be as efficient as possible.
If needed, dividers can be scaled a little bit, to make them more lose in order to make it easier to disassemble. It will depend on your 3d printer tolerances.
Print settings:
- Infill doesn't matter; if you print it with 3 perimeters (or more), the walls will be solid and won't require infill.
- Pla works great, but PETG or RPET can be used to give it a little more flexibility.
happy printing!