4.5mm pellet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4.5mm pellet holder (foam and spring required)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
For those who interested: the pellet guide might need some sanding for a proper fit (it can be tight). I used a pen spring for the pusher (working just fine). Depending on the spring size you may want to modify the depth of the depression to allow compression. Pins on the bottom_part will help keep the spring in place during and after assembly.
For improved rigidity, the hinge and pin are printed separately to optimize layer orientation.
The .blend file includes models for cutting the pellet guide in case you want to modify its layout.
Some foam will be needed at the top to keep the pellets securely in place when the cover is closed.