1 / 1
4040 Double-Slot Extrusion Clip-in Screw Anchor: Lite Version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips into the extrusion and provides a slot for an M3 nut and a hole for an M3 screw to reach the nut.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This fits into double-slot 4040 extrusion, like on the sides of the Elegoo Neptune 4 Pro. It has a slot for an M3 nut (the ones I used are 5.3mm flat-to-flat and 2.2mm thick, but slightly larger should work) and a hole for an M3 screw to engage with that nut.