Prusa Core One nozzle Wiper v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle wiper arm for the Prusa Core One and a Bambu Lab A1 nozzle wiper silicone pad.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 136
- Wydruki
- 4
- Wyświetlenia
- 1685
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I designed v2 because the Printhead touched the wiper while auto bed leveling when used the outer borders of the printbed in v1.
Because of its size you can see everything of your status-LED-stripe.
I printed it in ABS for stability and temperature insensitivity.
printed with supports
snug fit - slide it in from right to left - you can use an M3 screw and nut
gcode as the end block after the purge line
(M221 S100 ; set flow to 100%)
V2:; ----NOZZE WIPE----G0 X20 Y-18 Z2 F5000G0 X70 Y-18.5 Z3 F5000G0 X20 Y-19 Z2G0 X70 Y-19.5 Z3G0 X20 Y-20 Z2G0 X70 Y-20 Z3
V1:; ----NOZZLE WIPE----G0 X20 Y-12.5 Z2 F2000G0 X70 Y-13 Z4 F2000G0 X20 Y-13.5 Z3G0 X70 Y-14 Z4G0 X20 Y-14.5 Z3G0 X70 Y-15 Z4