1 / 3
Enclosure Spool Holder Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the Prusa XL telescopic spool holder to Prusa Mk4 and Mini enclosure spool holder
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I needed a solution for mounting 2kg spools in the Mk4 enclosure. I did not want to deal with a secondary extension to the original enclosure spool holder for fear of losing the extension or an extra-long enclosure spool holder that would take up a lot of space when not using a 2kg spool. A coworker mentioned retrofitting the Prusa XL spool holder to the Mk4 enclosure and this is the result.
Printing instructions:
- I printed the adapter on the Prusa Mk4 with the hexagonal hole on the bed.
- 0.4mm Nozzle
- 0.2mm Layer height
- 3 Perimeter walls
- 20% Grid infill
- I used Prusament PETG. You can probably get away with using PLA but I would not recommend it.
- The part is designed to not use supports when printed with the hexagonal hole on the bed.
- Depending on your bed adhesion situation you may want a brim.
Other required parts:
- From XL printable parts by Prusa Research
- telescopic-spoolholder-base
- telescopic-spoolholder-slider
- 85mm Long M5 socket head cap screw (same screw used for the Prusa XL spool holder)
- M5 Hex nut
- If necessary, from Enclosure Printable Parts by Prusa Research or MINI Enclosure Printable Parts by Prusa Research
- Spool-holder-R