1 / 4
Sony FS5 Grip Relocator
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a handgrip relocation kit I made to fit onto standard 15mm LWS rails. It allows the camera to be used as an…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 688
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a handgrip relocation kit I made to fit onto standard 15mm LWS rails. It allows the camera to be used as an ENG-style camera when shoulder mounted.
The hand grip that comes with the camera sits somewhat in the same position that a handgrip from a traditional ENG lens would sit.
To construct you will need:
- Three M5 bolts of roughly 20mm length (8mm hex head)
- Three M5 wing nuts and three M5 washers
- One M6 bolt of roughly 25mm length (10mm hex head)
- Possibly 5mm and 6mm drill bits to drill out the holes to size if the bolts don't go through easily (depends on printer accuracy)
- A LANC extension cable. Smallrig makes one that works great.
Gently tap the bolts in place with a hammer.