Samurai girl HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HueForge art, size 150x150 or 200x200 wihout frame.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 198
- Wydruki
- 3
- Wyświetlenia
- 933
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Standard Digital File License
AI image - source/author: Andrew Bailey
Then used HueForge v0.9.0 to create the model.
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- Model size is 150 x 150 mm (or 200 x 200 mm second STL).
- Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions.
You may print at higher layer heights below the Base Thickness of 0.64mm. The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm.
It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.
These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.
PLA Elegoo + Black Transmission Distance: 0.3
PLA Sunlu META Grey Transmission Distance: 3.6
PLA Elegoo + Gray Transmission Distance: 3
PLA Elegoo Basic White Transmission Distance: 7
This print uses 4 unique filaments
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #13 (1.12mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.