1 / 5
Prusa MK3/MK4/MK4S 14.8mm (W) LED Light Bar Brackets — zdjęcie 1
1 / 5

Prusa MK3/MK4/MK4S 14.8mm (W) LED Light Bar Brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

UPDATED 12/25--Remixed LED light brackets for 14.8mm width light bar.

Ocena
0 / 5
Polubienia
6
Pobrania
18
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

******************UPDATED 12/25*******************

The Back and Front and Back Brackets have been updated. The shape of the bottom of the brackets were too low and caused collisions with the X-axis carriage which messed up the X-axis calibration. Those two files have been fixed.


******************************************************

I had to remix Tanker Tech's 17mm bracket for the 14.8 mm width light bar I got from Amazon.

There are three versions to choose from: Front and back LED bracket, Front only LED bracket, and Rear only LED bracket. Print 2 of whichever you use.

I don't know for sure, but I imagine that they would also work with the MK3 and MK2 because the top bar of the frame seems to be 40 MM wide also. For that matter, I bet they work with almost any printer with a 40 mm top bar.

This is the light bar I bought from Amazon. No compensation, just FYI.

Tagi