Athena LS-300B Speaker Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for Athena LS-300B floorstanding speakers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
I designed this as a replacement for a speaker foot I damaged during a house move.
Directly replaces the stock foot and uses the existing screws to attach, and existing foam.
To remove/replace the existing foot:
- Peel off the foam
- Remove the 3x small screws
- Flick the plastic cap off with a small flathead screwdriver
- Remove the 2x screws below and keep for attaching the new foot
- Remove the old damaged foot
- Attach new foot using the 2x screws you kept earlier
- Using some CA (Super) Glue re-attach the foam
Printed on my K1 using basic CR-PLA Prototyping filament at 25% infill and tree supports for the small overhangs (this is what the screws grip on, you may need to disable “remove small overhangs” in your slicer)