Insta360 GO 3S Mount for Dye i4 / i5 Mask (Airsoft / Paintball)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount designed to attach an Insta360 GO 3S to a Dye i4 (or i5) mask for capturing first-person footage.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 798
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a mount designed to attach an Insta360 GO 3S to a Dye i4 (or i5) mask for capturing first-person footage while playing airsoft or paintball.
Update [7/4/2025]
- Added new part ("Mount_Frame_EXT_Battery") that allows user to attach Insta360's external battery pack to camera module (replaces "Mount_Frame" and "Rear_Plate")
Notes
- Uses a 1" diameter, 1/8" thick polycarbonate disk (from Amazon) to protect the lens (press-fitted).
- Hinge is fastened with a 25mm M3 screw, nut, and some washers.
- Assembly is friction-fit
- Secured to the mask using four zip ties through the top vents — should work for both Dye i4 and i5.
- Has vent holes on the front and back of the housing since the GO 3S gets quite hot while recording.
- Includes either a Left or Right-biased mount, depending on which way you want the camera lens to lie horizontally
- Includes a general-purpose mount if you want to attach the camera elsewhere.
- The print should be thick enough to withstand both airsoft BBs and paintballs (I don't recommend shooting it at point blank, however).
This project is still a work in progress — I may make changes or improvements in the future.
Print Settings
Printer brand:
Creality
Printer:
Ender 3 Pro
Resolution:
0.2
Infill:
25% (100% for more durability)
Supports:
Only needed when printing out the front plate, since there is a lip that holds the polycarbonate shield in place
Filament brand:
Polymaker
Filament color:
Black
Filament material:
PETG