1 / 6
Door holder - Anycubic Kobra S1 / S1C
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design will help you avoid clogs in your hotend during printing with PLA and PETG
- Ocena
- 4,833 / 5
- Polubienia
- 159
- Pobrania
- 976
- Wydruki
- 12
- Wyświetlenia
- 5843
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 12) (Komentarze: 27)Remiksy (1)Kolekcje (302)Powiązane
This design will help you avoid clogs in your hotend during printing with PLA and PETG by keeping the chamber of your printer well-ventilated.
Assembly instructions
1. Remove screw of original handle
2. Reassemble the handle + door holder. Use the same screws

Instructions for use
The door holder must be locked in each position, closed or open, to do this you only need to push up to unlock, turn and push down again to lock

