Door stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
Would you like to support my work? :)
Check out my full catalog with exclusives, early access and commercial licences.
—
A door stop that you can hang on the door handle when you do not need it without blocking the lock. It is flexible and locks under the door when you push it down with your foot.
Size: 20 x 40 (height) x 120 mm
This is the V2
Print settings
Required build volume: 20 x 40 x 120 mm
Material usage: 11g
Print time: 1h
Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 30% - or more if you want it to be less flexible
Build plate adhesion type: none, if you have bed bad adhesion then a brim