6mm ARC Cartridge Insert for Milwaukee Packout (48-22-8435)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6mm Advanced Rifle Cartridge Insert for Milwaukee Packout (48-22-8435) Ammo case
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 1729
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 2 part 6mm ARC Cartridge Insert for Milwaukee Packout (48-22-8435) case.
Typically, when participating in a Precision Rifle Match (PRS) or attending a distance rifle course, you need to bring a fair amount of ammunition. This allows you to put it all in a single ruggedized case. In theory, this meets or exceeds the requirements of airlines, etc.
When printed in two halves there are provisions for ¼ inch dowels to attach the two halves together. However, the print is good enough that the two halves don't appear to need the dowels. YMMV depending on your printer, etc.
This was originally printed on a Core One.
NOTE: COMPARED TO OTHER MAKES THAT ARE SIMILAR TO THIS THE BULLETS GO NOSE DOWN AND REST ON THEIR SHOULDERS. THIS IS IMPORTANT BECAUSE THIS WAY THEY ARE NOT RATTLING AGAINST THE LID OF THE PACKOUT. IF YOU ARE HAND LOADING THEM AND NOT USING A FACTORY CRIMP, THAT MEANS THE BULLETS MAY GET PUSHED FURTHER INTO THE CASE IF YOU USE A PACK OUT, INSERT THAT ALLOWS THE BULLET TO RATTLE AGAINST THE LID.